RAVENOL Trafoel 1000P

վաճառողի կոդը: 1330201
Կարճ հոդված: 1330201-700
Ամբողջական հոդվածը: -
Շտրիխ կոդ: -
Ժառանգական շտրիխ կոդեր:
Հնացած հոդվածներ:
Գին:
-

RAVENOL Trafoel 1000P

վաճառողի կոդը: 1330201
Յուղի տեսակը:

Transformer oils (insulating oils) are exposed to the influence of heat and oxygen, electric fields, and the catalytic effect of copper. For these reasons, high demands are made on the oxidation resistance of the transformer oil.

RAVENOL Trafoel 1000P meets these high standards. It is an insulating oil which has been specially developed for use in transformers and switches.

RAVENOL Trafoel 1000P has been proving itself under extreme operating conditions for a number of years. It has high purity due to the excellent oxidation stability. This means a long life of the oil filling.

Application Note

RAVENOL Trafoel 1000P Transformer oil is used as coolant and insulating oil in electrical equipment such as transformers, converters and switches as well as used as a dielectric in capacitors.

Additional information: All packages should be kept under cover. In an unprotected outdoor storage without a roof, the oil drums should be laid horizontally to store in order to avoid the possible iningress of water and the obliteration of the label. The product should not be stored at temperatures above 60 ° C. It must be protected from direct sun light or freezing conditions.

Characteristics

  • Use in extreme operating conditions
  • Excellent low temperature properties
  • High degree of purity
  • Excellent oxidation stability
  • Long life of the oil filling
  • Very good cooling capacity and a quick oil circulation
Ցույց տալ ավելին Ցույց տալ ավելի քիչ

Բնութագրերը

Կարգավորում Արժեք Աուդիտ
Brand RAVENOL  
Density at 20 °C, kg/m³ 895 EN ISO 12185
Մածուցիկություն 40 °C-ում, mm²/s 12 DIN 51562-1
Flashpoint, °C 135 DIN EN ISO 2592
Water content, mg/kg 30 IEC 60814
Surface Tension, mN/m 40 ISO 6295
Purity Transparent IEC 60296
Inhibitors, Gew% - DIN 51757
Viscosity at -30 °C, mPa*s 1800 ASTM D5293
Corrosive Sulphur - IEC 62535
- after, kV 70 DIN 51757
PCB - DIN 51757
Dielectr. Loss factor (DDF) at 90 °C 0.005 IEC 60247
- Acid Number, mgKOH/g 1.2 DIN 51757
DMSO Extract (PCA) 3 IP 346
- before, kV 30 DIN 51757